WM40 - 1 1/2" pulse meters

Có: 0 sản phẩm trong giỏ

WM40 - 1 1/2
  • Mã SP: AAKMN-WM4
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 11840
  • Compact size.
    Two independent pulse units which can be linked to allow doubling of the pulse output.
    Flexibility of installation options (e.g. can be mounted horizontally or vertically; no flow conditioning required).
    Low pressure drop allows for economical pump selection or gravity flow applications.
    Meter construction enables fast and easy on-site servicing without removal from application.
    Meter design minimises the number of wearable and replaceable parts and extends product life.
    Meter accuracy is verified by a factory calibration check after which an individual metrology report is issued.
    Both LC Displays meets European CE directive fot EMC.
    Deluxe/Standard Displays and Pulse Version have IP65/NEMA9 protection.
    Intrinsically safe LC Deluxe & Standard Displays. Certificate of conformity number PTB Nr. Ex-93.C.4033x & KEMA O5ATEX1168X
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền

Specification

Model M40/WM40
Meter Type Pulse / Standard LC Display / Deluxe LC Display
Meter Body Material Aluminium / 316 Stainless Steel / Bronze
Wetted Components:
Rotor Material
Shafts
O'ring
PPS / 316 Stainless Steel
316 Stainless Steel
NBR (Nitrile)
Flow Rate Ranges
(Litres Per Minute/US Gallons Per Minute)
Above 5 cPs
Below 5 cPs
10 To 250 / 2.6 To 66
15 To 235 / 4 To 62
Accuracy- Within (Of Reading) +/- 0.5%
Repeatability 0.03%
Maximum Viscosity (Of Standard Model) 1000 Centipoise ( > 1000 Hi Vis Rotors)
Maximum Operating Pressure 5500 kpa/800psi/55bar or flange rule where fitted (*PEI 1800kpa/260psi/18bar)
Pulser Type Hall Effect or
Reed Switch or
Combination HE / RS
Pulses Per Litre/Us Gallon 14.5 / 54.9
Max. Operating Temperature 80°C / 176°F, High Temp Option 120°C / 248°F
Recommended Mesh Strainer Size 60 Mesh

Port Size

To order flowmeter you must replace ‘X’ with the relevant number. This number will determine the following specifications:

Port Size: Calibrated and
Display In:
Electrical
Conduit Connection:
1 = 1 ½” BSP (F) ports Litres 20mm (F)
2 = 1 ½” NPT (F) ports US Gallons ½” NPT (F)
3 = 1 ½” ANSI 150lb Flange Litres 20mm (F)
4 = 1 ½” ANSI 150lb Flange US Gallons ½” NPT (F)
5 = 40mm DIN 16 Flange Litres 20mm (F)
13 = 40mm JIS 10K flange Litres 20mm(F)

PPS = Polyphenylene Sulfide Resins

*European common market - pressure equipment directive requirements


Options and accessories

WM40 - 1 ½” PULSE & LC DISPLAY METERS
M40 - 1 ½” PULSE & LC DISPLAY METERS
WM40ARX-X
M40ARX-X
WM40ASX-X
M40ASX-X
WM40BRX-X
M40BRX-X
WM40SRX-X
M40SRX-X
WM40SSX-X
M40SSX-X
FKM O-Ring Ο Ο Ο Ο Ο
FEP O-Ring Ο Ο Ο Ο Ο
EPDM O-Ring Ο Ο Ο Ο Ο
High Temp Rotors Ο Ο Ο
High Viscosity Rotors Ο Ο Ο Ο Ο
Hall Effect Sensor Ο Ο Ο Ο Ο
Reed Switch
Solvent Kit - - - - -
Hastalloy C Shafts - - - - -
Protective Boot Deluxe LCD + + + + +
Protective Boot Standard Display + + + + +
Remote Mounted LC Display + + + + +
Heating Jacket + + + + +
4-20ma Module Meter & Remote Mount + + + + +

Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-