Giá: Liên hệ
Thông tin sản phẩm:
The Peek-A-Flame Relay Series 7000 is a sensor module that activates a relay when a flame is detected by an ultraviolet sensor or a flame rod. The Peek-A-Flame is for flame detection only; it will not detect safe start, safety lockout, load switching or any other safety procedures.
UL recognized, CSA certified, & FM approved.
Plugs into an Industry Standard 11-pin base.
Test point at the front permits direct reading of the flame signal level, 0-12 VDC.
"Flame On" Light
"Flame Fail" Light indicates Test condition and can be activated remotely. By applying 12-120 VAC or VDC to Pin #10. Contacts are also activated between Pin #5 and Pin #6. A test signal is ouput on Pin #11.
Analog output on Pin #11 for remote monitoring by a PLC or similar device.