Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Compact multi gaging measuring computer with color LCD. 12 input channels for probes.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Motherboard Pentium with 32 Mbytes RAM
- Battery-buffered real-time clock
- Hard disk drive with a minimum capacity of 2 GB including controller
- Integrated disk drive, 3.5", with a capacity of 1.44 Mbytes
- Integrated high-resolution 12" color monitor (graphic representations possible) including monitor interface

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Motherboard Pentium with 32 Mbytes RAM
- Hard disk drive with a minimum capacity of 2 GB including controller
- Integrated disk drive, 3.5", with a capacity of 1.44 Mbytes
- Integrated high-resolution 12" TFT color display (graphic representations
possible) including interface
4 internal measuring inputs with 12 bit resolution for connection
to inductive probe integrated at the rear

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Measuring Interface Systems with up to 16 input channels.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Measuring Interface Systems with up to 8 input channels.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Easy to read 3 color analog display.

- For measurement with inductive probes (e. g. Mahr P2004) or electronic plug gages etc.

- Two inputs for Inductive Probes (alternatively compatible with probes from Mahr, Mahr-Federal, Tesa, Marposs).

- Extensive calculation of input signals: ±A, ±B and all combinations.

- Dynamic measurements:
Max, Min, Max-Min,
Max+Min, Mean

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Up to 4 indicating and operating columns can be mounted on one base unit

- Three-color illuminated bar graph with analog warning and tolerance limit display
- Two-line backlit LCD for indicating measured values, help texts,
and measuring units
- Up to two characteristics can be displayed simultaneously

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Highly accurate processing of measured values

- Zero setting is possible at any point within the measuring range

- Actual value of a standard can be acquired at the touch of a button

- Statistical functions x-bar, s, r and n for 1 parameter

- 2 inputs for Inductive Probes for single, sum or difference measurements

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- 16 characteristics can be defined

- With a equation editor (80 characters), input channels C1 to C8 are mathematically.
linked with factors and brackets using the 4 basic arithmetical functions.

- Static measurements: current value, square root, arc tangent.

- Dynamic measurements: Max, Min, Max-Min, Max+Min, mean.

- Statistical functions: n, x-bar, S, Xmax, Xmin, R.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Dynamics – simultaneously computes the minimum, maximum, T.I.R., nominal and actual gage head signal for dynamic measurement capability.

Multi-Range – three selectable ranges in inch or metric units.

Message Center – display provides a simple “menu-driven” setup procedure in English, French or Spanish.

RS-232 Output – for communicating with Data Collection Devices.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Battery operates more than 8 hours under full load.

Choice of power modules for 120 or 240 Vac operation.

±2 volt analog output.

Dual input – for single or differential modes.

Normal/Reverse transducer setting.

Specific models available for use with “Federal” or “Mahr” full-bridge lvdt inductive probes.

Selectable ranges in either inch or metric units.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Compact housing

Battery powered for portable usage in the workshop

Large analog display with 2 tolerance markers

Quick and reliable display of the measured value

Switchable measuring direction

One inductive probe can be connected

Fine adjustment due to the large range zero setter

Battery operation with the commerical available round R14 batteries

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Used to determine any deviation in the right angle rela-tionship between a horizontal surface and the earth’s gravitational force (usually expressed as an angular or linear deviation from absolute level).

- Show any change in this relationship over time.

- Compare the orientation attitude of separate or adja-cent horizontal surfaces.

- Level systems are angular-linear compatible.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
No other air gaging system offers so much — in the palm of your hand — mounted to the workbench or even right to the machine tool. µDimensionair is rated IP-54, so, it can be used on the shop floor — and, the air tooling cleans dirt from the part for high performance measurements — fast and easy!



Air gage readout is right in front of you — simple and clear.

Fixed resolution and balanced air system makes the gage stable and reliable for your manufacturing environment.

Single mastering for fast setup.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Uses regular shop air (40 -150 psig).

Internal pressure regulator keeps measuring pressures within calibrated range.

Adjust meter to zero using a single setting master and the zero setting screw.

High visibility meter has fine line graduations and a needlethin hand for clear, precise readings. An air filter is included to remove dust and dirt contaminants from air line.

Tooling mounts to the front of the unit. Connections are tight with finger pressure.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Uses regular shop air (60 -150 psig).

Internal pressure regulators and differential meter assure ultimate stability over full operating range.

Adjust span and zero setting to tune the gaging range to the interchangeable dial ranges.

Interchangeable dials - dials provide an easy, inexpensive means to accommodate various ranges.

High visibility meter has fine line graduations and a needle thin hand for clear, precise readings.