Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Special software for download of measuring data.(TNP series only)

Download the torque data of open and close into Excel.
Download the memory data into Excel.
Create the frequency distribution graph of memory data. ※Excel is registered trade name of Microsoft

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Automatic torque test

Available to measure high accuracy automatic torque test with combine the TNX series (High end digital torque meter).

Giá: Liên hệ

Khuyến mãi:
Khuyến mại giảm giá trong tháng tùy theo giá trị đơn hàng

Thông tin sản phẩm:
Căn mẫu chuẩn: Dùng để hiệu chuẩn các thiết bị đo lường. Hoặc xác định chính các độ dài các dụng cụ sau gia công một cách nhanh chóng và chuẩn xác.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Pin Gages
Thread Pin Gages
Setting Standards
Thread Gages
Checking Plug Gages

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Guaranteed acceptance or free - scroll down for details
Lapped to size and polished. Non-gaging areas black oxidized - ring faces ground
Meet all requirements of ANSI Specification B47.1-1988. Manufactured in accordance with ANSI Specification B89.1.6-1984.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
As comparison reference and utilization standards in the field of length measurement
For checking gages and measuring instruments
For setting devices of all types designed for length measurement and in particular their displays

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Rigid cast-iron stand, making the unit temperature stable.
- Vertical slide with upper probe easily adjustable.
- Fine adjustment via rigidly connected parallelogram springs.
- Electropneumatic lifting.
- Extremely smooth manipulator operation due to slideways,
which are impervious to dirt.
- Measurement not influenced by manual force.
movement of the gage blocks due to support consisting of
hardened circular guide bars.
- No zero setting required, since the set value is automatically
related to the nominal value of the respective reference gage
block.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Same highly linear, stable electronics as 130B-24.

- Designed for measuring blocks above 4.000" (100 mm) but capable of checking shorter blocks as well.

- Linear ball slide for smoothly moving long gage blocks without danger of tipping them over.

- Large platen area for staging blocks before measurement - critical to achieving thermal equilibrium with the gage.

- Fully counterbalanced "floating measurement frame" to isolate measurements from vibration.

Open frame design allows comparison measurement of large disks, up to 24" in diameter.

- Can be operated from the same computer as 130B-24.

- Scale on left-hand post allows rough positioning, and micrometer-style spindle allows smooth, easy mechanical fine-adjustment.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Mahr Federal’s 130B-24 Gage Block Comparator is truly the preferred choice of all major calibration laboratories. It is specifically designed for the measurement of gage blocks by comparison, with no compromises made. The Model 130B-24 provides the ultimate in resolution and reproducibility for measurement of industry’s most important dimensional standards.

Unique "Floating Measuring Frame" assures true point-to-point measurement.

Single sensor design for the lowest possible electronic noise.

- Precise counterbalancing for control of measurement forces.

- Resolution of 0.1 microinch/0.001 micrometer.

- Repeatability of 0.2 microinches/0.005 micrometers (6s < 1 microinch/0.025 micrometer).

- Measurement capacity from 0.010" through 4" (0.25 mm through 100 mm).

- Integrated measurement software and user interface.

- Built-in positioner for reproducible measurement locations.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- The cost-effective testing device for semi- or fully automated testing of dial indicators, dial comparators, lever-type test indicators, 2-point inside measuring devices, and inductive and incremental probes.

- Designed as a table-top unit, the OPTIMAR 100 is user-friendly and ensures fast test runs. It features a motorized drive and is equipped with a high-resolution measuring system. The test run is software-controlled.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Its unusually high measuring precision, the high measuring speed, novel measuring procedure and its operating comfort assure the 828 CiM its top position amongst the universal measuring machines.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
High-precision length measuring machines for the monitoring of inspection devices

- Secure operation
- Important elements of the measuring procedure are conducted automatically
- Based on world-wide current standards

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Superior accuracy of measurement
- Long direct and maximum measuring range
- Tooling sets configured of specific jobs provide immediate readiness for operation
- Simple and lucid operator promting makes operation highly convenient

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Superior accuracy of measurement
- Large direct measuring range
- Constant measuring force over the entire measuring plunger adjustment range
- Multitude of accessory sets and components in a modular system for a solution of the most varying measuring tasks

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Universal length measuring machine with laser - ULM L

- Belongs to the high-end length measuring instruments with large direct measuring range
- High flexibitiliy in the application range (measurement of smallest and large workpieces possible)
- Computer-assisted correction of temperature and measuring pressure influences (optional: humidity correction)

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Linear 100 with MarCheck

Universal single-axis length measuring instrument with measuring and evaluation unit MarCheck

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Linear 800, 1200, 2000

Universal single-axis length measuring unit with MarCheck