CMCP590 Acceleration Enveloping gE Transmitter

Có: 0 sản phẩm trong giỏ

CMCP590 Acceleration Enveloping gE Transmitter
  • Mã SP: CMCP590
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 3876
  • 100 mV/g, IEPE Accelerometer Input
    4-20mA Output in Acceleration Enveloping
    3 Selectable Filter Ranges #2, #3 & #4
    50-1,000, 500-10,000 and 500-40,000 Hz.
    Fault "OK" Detection
    Buffered Transducer Outputs
    CE, CSA & UL Approved
    Class I Division II
    DIN Rail Mount
    Optional Alarm Module
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền
The CMCP590 Transmitter are a 4-20mA enveloped acceleration transmitter. Used in with a 100mV/g accelerometer, it processes the dynamic vibration acceleration input signal to defects in over-rolling bearing defects or gearbox problems.

Alarms relays and trip multiply are available with the Monitor version.

Alarms - The CMCP500A Series Monitors have two independent set points, with LED alarm indicators and output relay contacts (Alert and Danger). Set points are adjustable via potentiometer, from 0 to 110% of full scale. Each has an adjustable delay of 1 to 10 seconds. SPST Relay contacts are rated 5 Amps @ 30 Vdc or 250 Vac for resistive loads.

Relay contacts can be independently configured by the user for either Normally Open (NO) (Standard) or Normally Closed (NC) operation. Relays are normally de-energized and can be configured for latching or non-latching (standard) operation. Latched alarms may be reset locally or by remote contact closure.

Trip Multiply - The monitors have set point multiplication of 3X via contact closure (2X available). To avoid tripping the alarms during machine start-up.
Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-