Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The TMHN 7 set of lock nut spanners is designed to make the mounting of self-aligning ball bearings more professional. To help ensure long-term reliability when mounting self-aligning ball bearings, it is vital to install the bearing with correct radial clearance.

7 different-sized spanners to fit nut sizes 5 to 11
Each spanner is clearly marked with correct tightening angle and protractor
4 grip points on each spanner giving better and safer grip on the nut
Reduced risk of damaging bearing by over-tightening

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Most popular hook spanner sizes combined in one set
The SKF-HN 4-16/SET hook spanner set contains 9 spanners based on the DIN 1810 standard suitable for tightening and loosening lock nut sizes 4 up to 16. The hook spanners are designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN 981 standard. Additionally, they are suitable for use with N, AN, KMK, KMFE and KMT as well as nuts manufactured according to the DIN 1804 standard.

Contains hook spanners HN 4 up and including HN 16 from the SKF HN series 9 different spanner sizes for the most popular lock nut sizes
Packed in a handy, high quality tool holding pouch for easy storage
Easy selection of the right size spanner

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Adapter block 226402

Cast steel block to which a pressure gauge and high pressure pipe can be connected
Floor support and a 90 degree connection nipple for the oil reservoir.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
300 MPa - (43,500 psi) and 400 MPa - (58,000 psi)

For mounting and dismounting bearings
Supplied with an oil reservoir in a compact carrying case.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
300 MPa - (43,500 psi) and 400 MPa - (58,000 psi)

The oil injection kits contain the oil injector 226400 complete with:
high pressure pipe
pressure gauge
adapter block
range of connection nipples
sturdy plastic carrying case

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
30, 150 and 300 MPa - (4,350, 21,750 and 43,500 psi)

The THAP air-driven pumps are available in three different pressure versions. They are used for mounting and dismounting OK couplings, for dismounting large pressure joints such as bearings, flywheels, couplings, railway wheels and in many similar applications. The pumps consist of a high pressure hydraulic pump, driven by an air piston. The units are supplied in a sturdy case including oil suction and return hoses with quick connect couplings. The pumps can also be supplied in complete sets which consists of pump, pressure gauge, adapter block, high pressure pipe and connection nipples.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
150 MPa - (21,750 psi)

The 728619E is a two-stage pump suitable for use with SKF Supergrip bolts and for the mounting and dismounting of bearings or components where a maximum pressure of 150 MPa (21,750 psi) is required. The pump is supplied with a 3 000 mm (118 in) pressure hose, quick connect coupling and mating nipple and pressure gauge. The pump is filled with SKF mounting fluid LHMF 300, is supplied with an extra litre and is protected in a sturdy metal case.

Two stage pressure pumping
Extra litre of mounting fluid
Packed in a sturdy protective metal case

Applications

SKF Supergrip bolts
All other oil injection applications where the maximum pressure is 150 MPa (21,750 psi)

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
100 MPa - (14,500 psi)

Suitable for hydraulic nuts smaller than or equal to HMV 54E
Extra litre of mounting fluid
Special pump configurations available
Packed in a sturdy protective case

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Large oil container 100 MPa - (14,500 psi) hydraulic nut pump

The TMJL 100 pump is suitable for use with hydraulic nuts (smaller than or equal to HMV 92E) and for mounting and dismounting bearings or components where a maximum pressure of 100 MPa (14,500 psi) is required.
The pump is supplied with 3000 mm (118 in) pressure hose, quick connect coupling and mating nipple, and pressure gauge.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
50 MPa - (7,250 psi) OK coupling Pump

The TMJL 50 pump is mainly intended for use on the low pressure side of SKF OK couplings, but is also suitable for applications where a maximum pressure of 50 MPa (7,250 psi) is required.
The pump is supplied with a 3 000 mm (118 in) long high pressure hose with quick connect coupling and mating nipple.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Spare Parts and Accessories for SKF Hydraulic Nuts:

O-Rings
Ball Plugs
Quick Connection Nipples
Maintenance Sets
Mounting Fluid
Dial Indicators

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
HMV E/A101 Series Threadless Hydraulic Nuts

Accommodates high drive up forces with ease
Mounting and dismounting bearings on tapered shafts or sleeves
Oil is pumped into the nut and the piston is pushed out with a force which is sufficient for mounting and dismounting bearings - effortlessly, accurately and safely
Supplied with a quick connection coupling to fit the SKF hydraulic pumps
Covers shaft diameters from 50 mm to 1 000 mm (1.967 in to 37.410 in)
Reduced time to mount bearings
Accurate safe bearing adjustment

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
HMVC E Series Hydraulic Nuts with Inch Threads

Accommodates high drive up forces with ease
Mounting and dismounting bearings on tapered shafts or sleeves
Oil is pumped into the nut and the piston is pushed out with a force
which is sufficient for mounting and dismounting bearings - effortlessly, accurately and safely
Supplied with a quick connection coupling to fit the SKF hydraulic pumps
Covers shaft diameters from 1.967 in to 37.410 in
Reduced time to mount bearings
Accurate safe bearing adjustment

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
HMV E Series Hydraulic Nuts with Metric Threads

Accommodates high drive up forces with ease
Mounting and dismounting bearings on tapered shafts or sleeves
Oil is pumped into the nut and the piston is pushed out with a force
which is sufficient for mounting and dismounting bearings - effortlessly, accurately and safely
Supplied with a quick connection coupling to fit the SKF hydraulic pumps
Covers shaft diameters from 50 mm to 1 000 mm
Reduced time to mount bearings
Accurate safe bearing adjustment

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Combined internal and external puller

Both internal and external pulling
Puller for use in every workshop
Self-locking arms
Special safety neck avoids damaging of thread and arms
Extra hexagonal head on beam allows rotation during dismounting
Gripping range from 12 to 350 mm (0.5 to 13.8 in)
Also available as complete set on a stand

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

The claws are especially designed to facilitate a precise fit in the bearing's raceways, providing good grip and allowing the application of higher dismounting forces
Each puller arm is fitted with a spring for easy installation
The puller arms are made of a single piece, laser-cut hardened-steel for strength and longevity
Arm sizes 4, 5 and 6 are fitted with filling plates to accommodate a wide range of bearings The hexagon head of the spindle is equipped with an anti-slip pin, which prevents the spanner from sliding down the spindle during dismounting
The rotation angle of the claw has been limited to allow easy insertion
The designation is laser-engraved on the arms allowing easy identification and selection

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Easy bearing dismounting even in the tightest spaces

Dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or where the application demands a long reach
Hydraulic and Mechanical versions available

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
One of the easiest and most effective ways to dismount small to medium size bearings is to use a mechanical puller. Using an SKF puller helps to ensure that no damage is caused to the bearing or to the bearing seating during dismounting. SKF standard jaw pullers offer you easy and safe jaw puller operation.

Range of five different jaw pullers with two or three arms
Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in)
Cone system for automatic centering and secure positioning of arms
Strong springs to keep arms apart for easy operation
Hardened, high quality carbon steel