Tháo Lắp Vòng Bi

HotLine (04)-2242 8148

Thiết bị đo điện đa năng

Tìm kiếm
Sản phẩm được quan tâm

Trang chủ > Kiểm Tra Và Bảo Trì > Tháo Lắp Vòng Bi

Sắp xếp theo

- SKF Extension pipes with connecting nipples
- Mã SP: SKF EXTENSION
- Lượt xem: 5395
- Tình trạng:
- Catering for difficult connection applications
  
  Extend a high pressure pipe
  Retain the pressured oil while the injector is refilled
  Connect to sleeves with oil injection preparations
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF Connection Nipples For Hydraulic Tools
- Mã SP: SKF CONNECTION NIPPLES
- Lượt xem: 5611
- Tình trạng:
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMMS Series - Tri-section Pulling Plate
- Mã SP: SKF TMMS SERIES
- Lượt xem: 4942
- Tình trạng:
- Efficient and correct dismounting
  
  The unique design of the TMMS series allows the application of force on most efficient point; the inner ring, and thereby requiring less force for dismounting than when pulling on the outer ring
  The firm grip behind the bearing's inner ring ensures that the pulling forces are only transmitted through the inner ring and not through the outer ring or the rolling elements, preventing bearing damage
  The tri-section construction allows even force distribution, preventing bearing locking and/or tilting on the shaft, especially in the case of SRB and CARB®, during dismounting
  Suitable for use in combination with any three-armed puller
  Special wig shape allows the plates to be easily inserted between bearing and the shoulder on the shaft
  Available in a wide range, covering most common shaft sizes
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMHS 8E Advanced Hydraulic Spindle
- Mã SP: SKF TMHS 8E
- Lượt xem: 4480
- Tình trạng:
- The SKF advanced hydraulic spindle TMHS 8E effortlessly generates maximum force of 80 kN (8 tones imperial), facilitating the easy removal of bearings or other components. The spindle is equipped with an integrated hydraulic pump for force generation. The TMHS 8E is supplied with a nosepiece and three extension pieces, allowing easy and quick adaptation to the shaft's length.
  
  Integrated hydraulic cylinder and pump - no separate pump is required
  Safety valve prevents overloading the spindle and the puller it is used with in case excessive force is applied
  The spring-loaded centre point allows easy centring of the puller on the shaft without damaging it
  
  Features:
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMHS 5E Advanced Hydraulic Spindle
- Mã SP: SKF TMHS 5E
- Lượt xem: 4369
- Tình trạng:
- Effortless force generation up to 50 kN (5 tons imp)
  
  The SKF advanced hydraulic spindle TMHS 5E effortlessly generates maximum force of 50 kN (5 tones imperial), facilitating the easy dismounting of bearings or other components. The spindle is equipped with an integrated hydraulic pump for force generation. The TMHS 8E is supplied with a nosepiece and three extension pieces, allowing easy and quick adaptation to the shaft's length.
  
  Integrated hydraulic cylinder and pump - no separate pump is required
  Safety valve prevents overloading the spindle and the puller it is used with in case excessive force is applied
  The spring-loaded centre point allows easy centring of the puller on the shaft without damaging it
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF Hydraulic Pressure Gauges
- Mã SP: SKF HYDRAULIC PRESSURE GAUGES
- Lượt xem: 4798
- Tình trạng:
- Hydraulic Pressure Gauges for SKF Hydraulic Pumps and Oil Injectors
  
  Liquid filled and/or equipped with a restriction screw in order to absorb any sudden pressure drop and prevent damage
  Safety glass and blowout discs are standard for all 100 mm (3.9 in) diameter gauges
  All have dual scales (MPa/psi)
  Covers pressures of 100 to 400 MPa (14,500 to 58,000 psi)
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF Feeler Gauge Kit - Set A
- Mã SP: SKF FEELER GAUGE KIT - SET A
- Lượt xem: 4697
- Tình trạng:
- For accurate bearing clearance measurement
  
  SKF feeler gauges (Part# 729865) are designed to measure the internal clearance when adjusting spherical roller bearings.
  
  13 blades of 100 mm (4 in) length
  High accuracy of measurement
  Supplied with protective plastic cover
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF High pressure pipes
- Mã SP: SKF HIGH PRESSURE PIPES
- Lượt xem: 5037
- Tình trạng:
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMBA G11 Heat Resistant Gloves
- Mã SP: SKF TMBA G11
- Lượt xem: 4358
- Tình trạng:
- Heat resistant gloves
  
  The SKF heat resistant gloves are specially designed for the handling of heated bearings. They are made of special fabric to obtain the following combination of features:
  
  Lint free Heat resistant up to 150 °C/302 °F
  Cut resistant
  Contains no asbestos
  Tested and certified for mechanical hazards (EN 388) and thermal hazards (EN 407)
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SPM-ELS-12 Electronic Stethoscope Kit
- Mã SP: SPM-ELS-12
- Lượt xem: 4479
- Tình trạng:
- The need to eavesdrop on mechanical sounds within machinery is essential in any maintenance department. Mechanical faults can often be heard. The problem is to locate the sound source quickly and accurately in a generally noisy environment.
  The electronic stethoscope is a sensitive listening stick, for location of all kinds of machinery noise. Valve chatter, tappet noise, piston slap, gear and pump noise and the operation of relays and solenoids are just a few of the many noises that may be traced, amplified and assessed with this device. ELS-12 can also be connected to a tape recorder.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF TMST 3 Electronic Stethoscope
- Mã SP: SKF TMST
- Lượt xem: 4698
- Tình trạng:
- Detects changes in bearing condition
  
  User friendly
  Rugged construction
  Output for tape recording
  Pre-recorded demonstration CD for comparisons
  Equipped with piezo-electric sensor and adjustable volume control
  Sturdy sensitive headset
  Two probes come standard
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF-TKED 1 Electrical Discharge Pen
- Mã SP: SKF-TKED
- Lượt xem: 4517
- Tình trạng:
- Unique, reliable and safe way to detect electrical discharges in electric motor bearings
  The SKF Electrical Discharge Detector Pen (EDD Pen) is a simple to use hand-held instrument for detecting electrical discharges in electric motor bearings.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF-CMAK 400-ML Basic Condition Monitoring Kit
- Mã SP: SKF-CMAK 400-ML
- Lượt xem: 4882
- Tình trạng:
- The SKF Basic condition monitoring kit does multi-parameter machine assessment.
  
  Assessment of overall machine condition
  Test bearings, pumps, motors, compressors,
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF-CMAK 300-SL Bearing Assessment Kit
- Mã SP: SKF-CMAK 300
- Lượt xem: 4845
- Tình trạng:
- The SKF Bearing Assessment kit offers multi-parameter machine evaluation.
  
  Check bearing and lubrication condition
  Assessment of overall machine condition
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF-CMSS 200 Machine Condition Indicator 2-Pack
- Mã SP: SKF-CMSS 200
- Lượt xem: 4512
- Tình trạng:
- The SKF Machine Condition Indicator is an economical vibration sensor and indicator for monitoring non-critical machines. It is ideal for machinery with constant operating conditions not previously monitored in plants (fig 1). The device can be compared to the "check engine" light in a car. What the "check engine" light does for the car, the SKF Machine Condition Indicator does for industrial machinery. Internal sensors measure velocity, enveloped acceleration (bearing or gear impulsive vibration) and machine surface temperature.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF SNL Hookspanner
- Mã SP: SKF SNL HOOKSPANNER
- Lượt xem: 4441
- Tình trạng:
- Easy and quick bearing mounting and dismounting in SNL housings
  
  The hook spanners of HN /SNL series are especially designed to facilitate easy and quick mounting and dismounting of bearings with tapered bore on adapter sleeve in SKF SNL bearing housings. They are also suitable for tightening and loosening a wide variety of lock nuts in both housing and shaft applications. The HN /SNL series consists of 16 sizes suitable for nut outer diameter ranging from 38 to 145 mm (1.5 to 5.7 in). The spanners are made of hardened high quality chrome vanadium steel for durability.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF Adjustable Hookspanner
- Mã SP: SKF ADJUSTABLE HOOKSPANNER
- Lượt xem: 4291
- Tình trạng:
- Four sizes for tightening or loosening up to 24 nut sizes
  
  Economic solution: 4 hook spanners cover 24 nut sizes
  Laser engraved designation of nut sizes covered by the spanner
  Versatile: suitable for KM, KML, N, AN, KMK, KMFE and KMT nuts
  Hole in the spanner's handle facilitates easy storage
  Minimises shaft and nut damage
  Safe and user-friendly
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- SKF Standard Hookspanner Ordering Page
- Mã SP: SKF STANDARD HOOKSPANNER ORDERING PAGE
- Lượt xem: 3928
- Tình trạng:
- Exact spanner radius reduces the risk of nut damage
  
  The HN series Hookspanners include 15 different size hook spanners based on the DIN 1810 standard. The hook spanners are designed for use with SKF KM nuts as well as any other KM nuts conforming to the DIN 981 standard. Additionally, they are suitable for use with N, AN, KMK, KMFE and KMT as well as nuts manufactured according to the DIN 1804 standard.
  
  Suitable for use in wide variety of applications
  Minimizes the risk of shaft and nut damage
  Plastic handle is oil, grease and dirt resistant to provide a better grip
  The plastic handle minimizes direct metal to skin contact, reducing the risk of corrosion in the handle area
  Hole in the spanner's handle facilitates easy storage
  Designation of spanner size is laser-engraved allowing easy identification and selection
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
Trang:

1 2 3