CMCP805 Eddy Probe Bracket 3/8"-24

Có: 0 sản phẩm trong giỏ

CMCP805 Eddy Probe Bracket 3/8
  • Mã SP: CMCP805
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 3880

  • Mounting Brackets are used when installing eddy probes (proximity probes) internally in the machine

    For 3/8"-24 threaded probes
    Machined aluminum
    Threaded and slotted to insure position and stability

  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền
Mounting Brackets are used when installing eddy probes (proximity probes) internally in the machine. They may be mounted directly to the side of radial bearings using two (2) 1/4"-28 Cap Screws. The brackets are 1/2" High x 1" Wide x 1" Deep (12.7 x 25.4 x 25.4 mm). The eddy probe mounting hole is offset 3/4" or 1/4" (19.05 or 6.35 mm) depending on the mounting direction of the block relative to the bearing. Tightening the mounting bolts applies a positive lock to the eddy probe preventing movement of the probe after mounting. These mounting blocks are available for 1/4"-28 UNF, 3/8"-24 UNF probe body threads. Since these mounting blocks are manufactured from Aluminum, they may be easily machined in the field as required during installation.
Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-