WM50 - 2" pulse meters

Có: 0 sản phẩm trong giỏ

WM50 - 2
  • Mã SP: AAKMN-WM5
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 12081
  • Compact size.
    Two independent pulse units.
    Flexibility of installation options (e.g. can be mounted horizontally or vertically; no flow conditioning required).
    Low pressure drop allows for economical pump selection or gravity flow applications.
    Meter construction enables fast and easy on-site servicing without removal from application.
    Meter design minimises the number of wearable and replaceable parts and extends product life.
    Meter accuracy is verified by a factory calibration check after which an individual metrology report is issued.
    All LC Displays meets European CE directive for EMC.
    Standard/Deluxe Displays MR100 and Pulse Version have IP65/NEMA9 protection.
    Intrinsically safe LC Deluxe and Standard Displays. Certificate of conformity number PTB Nr. Ex-93.C.4033x & KEMA Ex-00.E.1127x
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền

Specifications

Model M50/WM50
Meter Type Pulse / Standard LC Display / Deluxe LC Display / MR100 LC Display
Meter Body Material Aluminium / 316 Stainless Steel / Bronze
Wetted Components:
Rotor Material
Shafts
O'ring
PPS / 316 Stainless Steel / Hi Flow PPS
316 Stainless Steel
NBR (Nitrile)
Flow Rate Ranges
(Litres Per Minute/US Gallons Per Minute)
Above 5 cPs
Below 5 cPs
15 To 350 / 4 To 93 (HF 15 to 550 / 4 to 146)
30 To 300 / 8 To 79
Accuracy- Within (Of Reading) +/- 0.5%
Repeatability 0.03%
Maximum Viscosity (Of Standard Model) 1000 Centipoise ( > 1000 Hi Vis Rotors)
Maximum Operating Pressure 5500 kpa/800psi/55bar or as per flange rule 
(*PEI 1800kpa/260psi/18bar)
Pulser Type Hall Effect or Reed Switch 
or Combination HE / RS
Pulses Per Litre/Us Gallon 6.68 / 25.29
Max. Operating Temperature 80°C / 176°F, High Temp Option 120°C / 248°F
Recommended Mesh Strainer Size 60 Mesh

Port Size

To order flowmeter you must replace ‘X’ with the relevant number. This number will determine the following specifications:

Port Size: Calibrated and
Display In:
Electrical
Conduit Connection:
1 = 2” BSP (F) Ports Litres 20mm (F)
2 = 2” NPT (F) Ports US Gallons ½” NPT (F)
3 = 2” ANSI 150lb Flange Litres 20mm (F)
4 = 2” ANSI 150lb Flange US Gallons ½” NPT (F)
5 = 50mm DIN 16 Flange Litres 20mm(F)
13 = 50mm JIS 10k flange Litres 20mm(F)

PPS = Polyphenylene Sulfide Resins

*EU - pressure equipment directive 97/23/EC



Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-