Tube Firing Burners

HotLine (04)-2242 8148

Thiết bị đo điện đa năng

Tìm kiếm
Sản phẩm được quan tâm

Trang chủ > Thiết bị công nghiệp > Đầu đốt công nghiệp > Burners > Tube Firing Burners

Sắp xếp theo

- ImmersoPak
- Mã SP: LAAEC-360
- Lượt xem: 5856
- Tình trạng:
- The Eclipse ImmersoPak (IP version 2) burner is ideal for heating immersion tubes on cleaning tanks, spray washers, salt baths, quenching tanks, tempering tanks, asphalt tanks and similar equipment. ImmersoPak is easy to install, simple to operate, and offers durability and long service life in industrial environments. It delivers smooth, quiet performance, even during cold starts.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- ImmersoJet
- Mã SP: LAAEC-330
- Lượt xem: 5889
- Tình trạng:
- The ImmersoJet (IJ) is a nozzle-mix, tube-firing burner that is designed to fire at high velocities through a small diameter immersion tube in immersion heating tanks. The combustion gases from the burner scrub the inner tube surfaces to produce the highest heat transfer rate of any immersion burner available. It provides faster heat-up times than any other immersion burner. The standard burner includes a packaged blower, actuator control motor, integral butterfly valve, ratio regulator, burner body, combustion chamber, nozzle rear cover, spark and flame rods.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Single Ended Radiant Tube Burner
- Mã SP: LAAEC-325
- Lượt xem: 5319
- Tình trạng:
- The SER V5 burner delivers the best fuel efficiency of any burner in its class. With the burner and enhanced performance recuperator coaxially mounted inside a radiant tube, the SER V5 internally transfers combustion exhaust heat back to the burner air supply in a counterflow pattern, providing high preheat temperatures.
  
  The new, high efficiency recuperator design incorporates a unique dual finned combustor to provide an increased heat transfer surface for greater fuel savings. It also delivers exceptional heat flux and temperature uniformity.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- E-Jector
- Mã SP: LAAEC-319
- Lượt xem: 6013
- Tình trạng:
- The Eclipse E-Jector is a flange mounted emission reduction device for use in radiant tubes. It accomodates diameters of 4" up to 6" with maximum capacities of up to 350,000 BTU/hr (102,5 kW). E-Jector provides significant reductions in NOx emissions. In field trials, NOx reductions were achieved of more than 50% over existing emission levels. The E-Jector is designed to be used with Eclipse Bayonet style Recuperators allowing for high fuel efficiencies while keeping NOx under control.
  
  Every burner system that includes an E-Jector is custom engineered by Eclipse to maximize performance and assure compatibility with the radiant tube.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Bayonet-Ultra Recuperator
- Mã SP: LAAEC-318
- Lượt xem: 5452
- Tình trạng:
- Exclusive multi-tube design delivers fuel savings up to 30%!
  
  Bayonet-Ultra recuperators are high efficiency heat exchangers designed to fit into the exhaust leg of single, U, O, W or Trident-type radiant tubes. They're frequently paired with Tube Firing burners and suitable for use with exhaust streams up to 2100 Degrees Fahrenheit provide fuel savings up to 30%.
  
  Conventional recuperators have only one heat transfer tube. Each Bayonet-Ultra contains multiple tubes to dramatically increase the heat transfer area while significantly decreasing the amount of fuel required to maintain required heat levels. Plus, an air cooled housing cools the work area.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Bayonet Recuperator
- Mã SP: LAAEC-317
- Lượt xem: 5635
- Tình trạng:
- Bayonet recuperators are low cost conventional heat exchangers designed to deliver preheated combustion air to the burner. They're frequently paired with tube firing burners to provide fuel savings up to 30%.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- P-Tube
- Mã SP: LAAEC-315
- Lượt xem: 6006
- Tình trạng:
- The P-Tube burner is a radiant tube velocity burner for use in P-Tube furnace applications. The burner design utilizes flue gas recirculation entrained by the products of combustion. The flue gas recirculation provides lower NOx emissions and better tube temperature uniformity. By utilizing preheated combustion air, this burner delivers higher efficiencies than stand alone tube firing burners.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- Tube Firing Burner
- Mã SP: LAAEC-310
- Lượt xem: 5768
- Tình trạng:
- Eclipse Tube Firing Burners are designed to fire radiant and immersion tubes with inputs from 25,000 to 2,000,000 Btu/hr. The unique nozzle design creates an intense adjustable-length flame with a vigorous spinning action. The long, spiraling flame results in cleaner combustion, efficient heat transfer and more precise, uniform tube temperatures. The flame scrubs the inside of the fire tubes to remove the gas film boundary layer and increase heat-transfer effectiveness with outstanding temperature uniformity. Not only do these factors contribute to longer tube life, they also ensure consistent uniform process heating.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :