Cung Cấp Pa Lăng Khí Nén - Cầu Trục

HotLine (04)-2242 8148

Thiết bị đo điện đa năng

Tìm kiếm
Sản phẩm được quan tâm

Trang chủ > Thiết bị nâng hạ > Pa lăng

Sắp xếp theo

- ARO Chain Hoist 7700 & 7790 Series
- Mã SP: HAAIR-ARO
- Lượt xem: 5113
- Tình trạng:
- Meets ASME B30.16 Specifications
  Exceptional slow-speed control provides superior spotting characteristics and ability to confidently "inch" loads into position.
  Ideal for high duty cycles and when operating loads are near maximum capacity.
  Powerful, self-cooling rotary motors keep ARO hoists at peak performance in high temperature situations.
  Pendant or pull chain control responds immediately to operator's commands.
  Brake control easily adjusts to meet specific load ranges.
  Motor and gearing provides faster lift speeds with low air consumption.
  Compared to roller chain, link chain lasts longer, handles heavier loads, and is better for high duty cycles.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- HLK Chain Hoist Series
- Mã SP: HAAIR-HLK
- Lượt xem: 5356
- Tình trạng:
- Meets ASME B30.16 Specifications
  100% duty cycle. MLK/HLK are rated as HMI duty classification A5, severe duty. This equates to FEM 9.511 duty classification 2m.
  These hoist are ideal for the harsh environments found in steel mills, foundries and electroplating operations. These are also ideal for high duty cycle applications.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- MLK Chain Hoist Series
- Mã SP: HAAIR-MLK
- Lượt xem: 5344
- Tình trạng:
- Meets ASME B30.16 Specifications
  100% duty cycle. MLK/HLK are rated as HMI duty classification A5, severe duty. This equates to FEM 9.511 duty classification 2m.
  These hoist are ideal for the harsh environments found in steel mills, foundries and electroplating operations. These are also ideal for high duty cycle applications.
  Pull chain or pilot pendent controls provide precise spotting capabilities. For even more precise control MLKS slow speed models are available.
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
- CLK Chain Hoist Series
- Mã SP: HAAIR-CLK
- Lượt xem: 5898
- Tình trạng:
- Meets ASME B30.16 Specifications
  Rugged, lightweight and compact design
  Disc brake is non-asbestos and spring engaged with air release
  Quiet operation <75 dBA sound levels
  Upper and lower limit stops prevent dangerous over-travel of the hook
  Full flow pendent for maximum control and enhanced load positioning
  100% duty cycle multi-vane (6) air motor
  Hook or trolley mounted versions available
  Steel snap hooks with safety latches
  Standard lift is 10 feet; additional lifts are available
  Standard pendent length is 6 feet or 4 feet less than lift
- Giá NY: Liên hệ
- Giá bán: Liên hệ
- Khuyến mãi :
Trang:

1 2