Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
No other air gaging system offers so much — in the palm of your hand — mounted to the workbench or even right to the machine tool. µDimensionair is rated IP-54, so, it can be used on the shop floor — and, the air tooling cleans dirt from the part for high performance measurements — fast and easy!



Air gage readout is right in front of you — simple and clear.

Fixed resolution and balanced air system makes the gage stable and reliable for your manufacturing environment.

Single mastering for fast setup.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Uses regular shop air (40 -150 psig).

Internal pressure regulator keeps measuring pressures within calibrated range.

Adjust meter to zero using a single setting master and the zero setting screw.

High visibility meter has fine line graduations and a needlethin hand for clear, precise readings. An air filter is included to remove dust and dirt contaminants from air line.

Tooling mounts to the front of the unit. Connections are tight with finger pressure.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Uses regular shop air (60 -150 psig).

Internal pressure regulators and differential meter assure ultimate stability over full operating range.

Adjust span and zero setting to tune the gaging range to the interchangeable dial ranges.

Interchangeable dials - dials provide an easy, inexpensive means to accommodate various ranges.

High visibility meter has fine line graduations and a needle thin hand for clear, precise readings.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Assess and judge measuring results at a glance – nothing is easier than that with the Millimar S1840 column amplifier.

The Millimar S 1840 column amplifier offers a broad range of functions for combining the signals from both static and dynamic measurements.

Measuring results are indicated by way of 101 three-color LEDs. When the programmable warning and tolerance limits are exceeded, the LEDs change their color from green to yellow or red, accordingly — high visibility from any distance.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Digital and analog displays in a single unit. Large, high contrast digital readout shows exact deviation from zero; analog dis-play shows measurement conditions at a glance.

- Fixed resolution and balanced air system makes the Digital Dimensionair a stable and reliable system for manufacturing environments.

- Only a single master required to set zero; system is precalibrat-ed for correct magnification.

- Ranges and resolutions for virtually any air gage applica-tion, including 2-, 3-, 4- and 6-jet tooling plus AirProbes and JetProbes.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Though most frequently used for diameter measurement, many other types of dimensional
conditions can be checked using Mahr Federal
inductive probes and air gaging products in conjunction with specialized tooling. Applications include, but are not limited to: squareness, concentricity, I.D/O.D, center distance, parallelism, diameter and straightness, flatness, thickness, etc.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The pneumatic version of Millimar C 1208 features a built-in air-electronic converter. This enables air gages of different magnifications to be connected directly to the Millimar C 1208.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Tooling is interchangeable without adjusting system magnification.

- Federal Air Plugs have large clearance (see table below), allowing easy entrance into the hole being measured and greater measuring range.

- Long life - wide clearance and high chrome stainless steel body extends useful life of the Air Plug. Chromed steel or other materials for extreme use are available.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- For the rapid testing of diameter, roundness and conicity of bores.

- Especially suitable for testing batches with tight tolerances.

- No rocking in the bore is required to determine the reversal point.

- Therefore ideal for use in conjunction with a digital indicating instrument and for subsequent processing of measured values.

- Measuring head has a hardened, hard chromiumplated guide cylinder and carbide-tipped anvils.

The carbide expanding pin transfers radial movement to indicating instrument.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Measuring the diameter, roundness and conicity of bores

- Spring-loaded halves of measuring probe are split via expanding pin with precision-lapped taper. This movement is transferred to indicating instrument

- Maximum wear-resistance due to hard chrome plating. From 4 mm alternatively with carbide tipped available on request

- Constant measuring force as a result of built-in spring thus eliminating user influence

- Highly versatile, each gage covers a large range. Within the respective limits, quickly and easily adjustable to any size and any type of measuring application

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
844 N- For measuring of diameter, roundness and conicity of bores as well as distances

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
For diametrical two ball measurement to
obtain the pitch diameter and conical form of internal gears

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Superior Accuracy for Production and Inspection
- Rugged construction for long life and low maintenance
- Outstanding stability

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Designed for high production I.D. gaging
- Easy to use, just insert plug into the diameter and read. - - No rocking required
- Long life due to tungsten carbide contacts and vee rod ensures a durable motion transfer

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Compact probe, measuring length 12 mm

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- Measuring range 12 mm
- The measured value is registered by the highly precise mounted measuring spindle
- Movement of the measuring spindle is detected by a scan grid system employing photo-electric cells responding to brightness