Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP280 case mount accelerometer housing provides physical and environmental protection for several sensors when permanently mounted. Its use is primarily designed for installations where the accelerometer is prone to damage from adverse conditions. When properly installed the CMCP280 meets API 678 standards. The mounting kit includes a dome cover, a mounting base with a single 3/4” NPT conduit connection, a neoprene base gasket, O-ring gasket for the cover, mounting bolts, washers, and one (1) 1/2” NPT reducing bushing. The kit does not include the accelerometer. The CMCP280 will accommodate any sensor that has a diameter less than 1.25” and an installed height of less than 4.75”.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP220 Adhesive Mount Kit provides all the items necessary for adhesive mounting of accelerometers. Conveniently sized for 10, 32, 64 or 128 Accelerometers, the kits contain the required mounting pads, adhesive bypacs, silicone dielectric and piloted end mills.
Each Kit Includes the Following Quantities:
CMCP220- 10
32
64 128
CMCP200 Mounting Pads 10 32 64 128
CMCP210 Adhesive Bypacs 10 32 64 128
CMCP212 Silicone Dielectric 1 2 3 6
CMCP270 Piloted End Mill Kits 1 2 3 6

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
1/4"x28 stud or epoxy mounted our stainless steel mounting pads are used to provide a flat surface for mounting accelerometers. They are available in 416 SS magnetic versions for use with accelerometer magnetic bases and 316 SS non-magnetic versions for standard stud mounting. They are available with and without a 1/4"-28 UNF threaded mounting hole. All versions are 1" in diameter and available in either 1/4" or 3/8" thickness.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Mount your Accelerometers quickly and easily with the CMCP250 Accelerometer Mounting Kit. The kit includes all the items required to mount up to 33 Accelerometers: 25 Mounting Pads and 8 Motor Cooling Fin Mounts. Kit includes: stainless steel mounting pads, stainless steel motor fin mounts, stainless steel mounting studs, mounting epoxy with activator, plastic filler, mixing nozzles, silicone dielectric, silicone RTV, 1" dia. spot mill, pilot, drill, tap, tap handle, carrying case and instructions.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

The CMCP-260 junction boxes are connecting centers for terminating the outputs of accelerometers or other transducer field wiring. The CMCP-260 is constructed of molded NEMA 4X fiberglass, NEMA 4 painted steel, or NEMA 4X Stainless Steel. Oil resistant "O" Ring gaskets are also a standard feature.

CMCP-260 enclosures only contain a back panel, no terminations are provided.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

The CMCP261 Liquid Tight Strain Relief Connectors are used for making direct accelerometer or transducer extension cable entries into the junction boxes listed above. Long cable runs or cables other than the actual extension cable should be installed in conduit.

Constructed of Polyamide
Providing both:
Environmental sealing
-and-
Strain relief
Temperature rated to -40° to 212° F (-60° to 100° C).
Pressure rating of up to 150 PSIG.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP-265 series Termination Junction Boxes are multiple channel connecting centers for terminating the outputs of accelerometers or other transducer field wiring. Crew Clamp DIN Rail Mounted terminals are provided for the intermediate termination of Accelerometers, Proximity Probes, Speed Sensors, RTD?s, and other transducers. Three terminals are provided per channel.

Fiberglass boxes are light gray in color and are provided with mounting feet and stainless steel mounting screws. Also available in Painted Steel and Stainless Steel. Fiberglass and Stainless Steel boxes are rated NEMA 4X.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP312 provides a switchable BNC output for up to 12 Accelerometers, and easy access for connecting Data Collectors and Analyzers. The CMCP312 small size allows it to be mounted almost anywhere.The CMCP312 mounts on Standard 35 mm DIN Rail and Accelerometers are easily attached using the provided screw terminals. The CMCP312 is for Interior Mounting, if mounted outdoors a suitable Junction Box should be used.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP305 Quick Access series BNC boxes are a low cost solution to adding a local measurement point to your maintenance route. The polycarbonate enclosure is rated for Nema 4, Nema 4X and IP67. The "screw type" terminals can handle up to 16 awg wire and are mounted on the lid, leaving the base of the enclosure for wiring. The CMCP305 is available in 2 and 4 channels with optional CMCP261-01 Liquid Tight Strain Relief Connectors pre-installed. STI's wide variety of BNC and Switch boxes are designed to bring the measurement point to you, keeping you out of the way of moving parts and saving you time from having to walk to each location. For another low cost solution, add our CMCP1100 Accelerometers to this system to keep your costs down so more can be done on other machines

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
BNC Junction Boxes For Easy Remote Access To Accelerometers

Individual BNC connection for each accelerometer
1, 2, 4 and 6 Channel (Custom on Request)
Oil resistant "O" Ring gasket
Nema 4x, IP66
Available in Fiberglass, Painted Steel and Stainless Steel
Engraved tagging for channel identification

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Entek IRD coiled cable with 7 Pin LEMO Connector to BNC-M Connector. Cable is shielded and has a retracted length 2 Ft. and a extended length 10 FT. Cable Assembly weighs 9.6 oz., coil diameter is 0.75 inches and cord diameter is 0.21 inches.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP-603 series extension cables are designed to work with all accelerometers using a MIL Spec 5015 2-Pin connector. It utilizes a positive seal "O" ring that mates with the 2-pin connector found on the majority of accelerometers. The connector backshell is fully potted and designed to be water tight. The 20 AWG cable is twisted and shielded to provide EMI and RFI protection.

Supplied blunt cut. If lugs or BNC required, please call. Armored Cable is also available as an option.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP-603 series extension cables are designed to work with all accelerometers using a MIL Spec 5015 3-Pin connector. It utilizes a positive seal "O" ring that mates with the 2-pin connector found on the majority of accelerometers. The connector backshell is fully potted and designed to be water tight. The 20 AWG cable is twisted and shielded to provide EMI and RFI protection.

Supplied blunt cut. If lugs or BNC required, please call. Armored Cable is also available as an option.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
The CMCP625 adaptor converts the 2-Pin MIL Spec 5015 connector found on most industrial accelerometers to BNC. The adapter shell is completely potted and has an interfacial "O" ring for a positive seal to the accelerometer.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
he CMCP602 series extension cables are designed to work with all accelerometers using a MIL Spec 5015 2-Pin connector. It utilizes a positive seal "O" ring that mates with the 2-pin connector found on the majority of accelerometers. The connector backshell is fully potted and designed to be water tight. The 20 AWG cable is twisted and shielded to provide EMI and RFI protection.

Supplied blunt cut. If lugs or BNC required, please call. Armored Cable is also available as an option.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Sensitivity: 100mV/inches/S
Frequency Response: 2.5 Hz - 7 kHz
Exit Type / Connector: top, R6 type, 2 pin
Max. Temperature: 120°C
Mounting: 1/4-28
Intrinsically Safe FM-Cls I, Div 1