Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Isolation valve allows insertion and removal with the pipe under pressure
Two sizes fit entire pipe range: IP115 to 10", IP215 to 48"
Turbine sensor allows lowest minimum flow rate
High-quality ruby bearings for excellent low-flow performance and long life
One easily-replaced moving part
Square-wave frequency output can connect directly to PLC's or counter controls
Uses standard NPT threaded pipe fittings or saddles
Controls can be remote or meter mounted

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Two sizes fit entire pipe range: TX101 to 10", TX201 to 48"
Turbine rotor to optimize minimum flow limits
High quality ruby bearings for long life
One easily-replaced moving part
Square-wave frequency output can connect directly to PLC's or counter controls
Uses standard NPT threaded pipe fittings or saddles
Compatible with all Seametrics controls
Bidirectional indication available as option

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
High-quality ruby bearings for excellent low-flow performance and long life
One easily-replaced moving part
Pickup exerts no magnetic drag on the rotor
Square-wave frequency output can connect directly to PLC's or counter controls
Indicator or transmitter can be mounted on the flowmeter or remote
Fittings are available in a wide variety of materials and sizes

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
For use in irrigation, chemigation, agricultural automation, well usage monitoring, Dairy lagoons
4, 6, 8, and 10" pipe sizes
Simple as a mechanical meter
No moving parts
Built-in pulse output
Minimal straight pipe
Battery or external power
Solar compatible
Data logger compatible
Telemetry-ready

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
- For use in irrigation metering, center pivot monitoring, fertigation control
6" and 8" pipe sizes (10" in development)
- No moving parts
- Built-in outputs for telemetry
- Tamper evident seal
- Built-in rate and totalizer

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Weld on fittings for IP80, TX80 and EX80-Series flowmeters

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Saddle-type fittings for IP80, TX80 and EX80-Series and IP and TX100-Series flowmeter

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Fittings for IP80, TX80 and EX80-Series flowmeters

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
No moving parts
Requires no straight pipe
Pulse and/or 4-20 mA output
Chemical and corrosion resistant
Insensitive to fluid density and fluid viscosity changes
Standard pulse and 4-20mA outputs

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
For use in industrial and municipal water/wastewater, well usage monitoring, cooling tower water treatment
4, 6, 8, and 10" pipe sizes
Simple as a mechanical meter
No moving parts
Built-in pulse output
Minimal straight pipe
Battery or external power
Solar compatible
Data logger compatible
Telemetry-ready

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
No moving parts
Minimal straight pipe required
Battery powered
Corrosion resistant
Built-in rate & total indicator
Simple as a mechanical meter

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Isolation valve allows installation and removal under pressure
Useful in large water utility pipe and other applications where shutdown is not an option
EX115 fits pipe from 3" to 10"
EX215 fits pipe from 10" to 48"
Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
In most applications, installation tool not necessary due to small tube diameter
Available in brass or 316 stainless steel
Standard valve material is brass, with stainless optional

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Depth adjustable sensors
EX101 fits any 1-1/2" pipe fitting (standard saddle, for instance) and adjusts to pipe sizes 3-10"
EX201 adjusts to pipe sizes 10-48"
Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
Accept SeaMetrics modules for rate and total indication, 4-20 mA conversion, data logging, and flow switching
Alternatively, signal can be sent directly to a PLC or other control
Available in brass or 316 stainless steel
Immersibility and reverse flow output available

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:


Low-flow performance and accuracy superior to any mechanical flow sensor
No moving parts to wear out
Dedicated fittings for simplicity
Retainer clip automatically sets correct depth
Meter extends only about 1/8 of pipe diameter, minimizing potential for clogging with debris
Simple pulse train output can be used with any SeaMetrics signal processing module, or sent directly to a PLC
Available for pipe sizes 1" to 8", in brass, 316 stainless, and PVC

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Oval gear meter

The electronic oval gear meters for product delivery control and measurement are used in the private distribution of low, medium and high viscosity fluids such as fuel, lubrication oil and other special fluids compatible with the construction materials. The oval gear measuring principle adopted offers high precision and low pressure losses together with a compact lightweight design and easy installation.
An electronic card with microprocessor permits control of the display and calibration of the meter. A complete range of models is designed to satisfy all flow rate requirements.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Oval gear pulse meter

The oval gear pulse meters are designed to meet a wide range of product delivery measuring requirements in the private distribution of fuel, lubricant and low, medium and high viscosity liquids. The oval gear measuring principle adopted offers high precision and low pressure losses.
A complete range of models is designed to satisfy all flow rate requirements.
Easy interfacing with control systems makes these pulse meters the ideal solution for equipping fuel delivery pumps for private use in stationary lubricant transfer/delivery systems, as meters for tank filling arms, for control of burner or power unit fuel consumption and other industrial applications requiring fluid delivery control.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Oval gear pulse meters

Designed and realised to be used with the range of pulse meters. Remote installation is provided by simply connecting 2 wires. A large screen simultaneously displays the quantity delivered and the non resettable total. The Remote Display also comes with software applications for calibrating flow metres.
It is available both as a basic display device and as a pulse emitter. It is indispensable when the receiver only recognises discrete quantities of pulses.
The remote display is the ideal addition to our series of pulse meters wherever display and reading of the quantities delivered are indispensable, not directly at the point of installation of the flow meters, but over a distance.
With their easy interfacing management systems, pulse transmitter models connected to Remote Display extend the field of application of pulse meters.

Giá: Liên hệ

Khuyến mãi:

Thông tin sản phẩm:
Turbine digital meter

A meter for delivering low viscosity fluids with a turbine measuring system. Easy to install, in line or at the end of a delivery pipe, equipped with an easy-to-read, compact screen.
The meter can be installed directly onto the nozzle for convenient, on-the-spot reading of the quantity delivered.
Thanks to its strong casing and a sealed plug-in electronic card, this sturdy meter can be used in practically all conditions.
The card can be rotated for easy display reading from all angles. The microprocessor is powered by two easily replaceable, long-lasting batteries. Simple, reliable, versatile, economic, the perfect instrument for managing liquid deliveries.