Electromagnetic flowmeters MUT1000EL

Có: 0 sản phẩm trong giỏ

Electromagnetic flowmeters MUT1000EL
  • Mã SP: BAJERM-1000EL
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 14119
  • MUT1000EL sensors represent the state of art of EUROMAG INTERNATIONAL production for water cycle and process application. The new structure for the generation of the magnetic field, the innovative route of the signal generated by the electrodes, is giving a sensor with an extremely measurement range, keeping the extremely compact dimensions: EL Extended Linearity.
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền
MUT1000EL sensors represent the state of art of EUROMAG INTERNATIONAL  production for water cycle and process application. The new structure for the generation of the magnetic field, the innovative route of the signal generated by the electrodes, is giving a sensor with an extremely measurement range, keeping the extremely compact dimensions: EL Extended Linearity.


This new sensors series follows the successful tradition of the MUT1000EL introducing a measurement range of more than 1:1000 without linearization software. These kinds of performances allow doing very accurate measures on a wide flow rate and to count lower flow rates that before would have been reset because of the effects of the converters cut off.

This flanged sensors series bases its operations on Faraday Principle, by which a conductor crossing a magnetic field generates a potential perpendicularly oriented to the same field. In this case the flow tube made in AISI 304 stainless steel, two coils are installed on the top and inferior part; the magnetic field, generated by the elctric current crossing the coil, induces in the electrodes a difference in the potential proportional to the flow rate. With the aim of measuring such potential of very values, the interior of the flow tube is electrically insulated, thus the process liquid is no longer in contact with the material of the flow tube.

The converter used generates the current supplying the coil induces in the electrodes a difference in the potential, processes the signal to calculate the flow rate and manages the communication with the exterior. The entire sensor, when installed in the separate version, has a degree of protection IP68 suitable for permanent immersion in water up to a depth of 1.5 m, thanks to a welded plate structure containing the coil and the electrodes.

Accuracy

Suggested flow rate 0,5...5 m/s

0,2%

 

Process connection

Dimensions

DN25…DN300

Connections

Wafer

Pressure class

PN16…PN40

 

Materials

Internal lining

PTFE, Ebanite

Electrodes

3 elet. HastelloyC, Titanium, Tantalium

Body

Carbon steel, AISI304, AISI316

 

Process temperature

Compact version

-25…80 C° : -13… 176 °F

Separated version

-25…130 °C : -13… 266 °F

 

Protection class

Compact version

IP67 NEMA 6

Separated version

IP68 NEMA 6P

 

Approvals

Eex approval separated version

-

 



Link Exchange: Duong Ren - Kinh Hien Vi - Panme - Ban Map - Thuoc Cap-