Electromagnetic-Counter MIK-..E

Có: 0 sản phẩm trong giỏ

Electromagnetic-Counter MIK-..E
  • Giá NY: Liên hệ
  • Giá bán: Liên hệ
  • Tình trạng:
  • Khuyến mãi:
  • Lượt xem: 2725
  • Tags: Bàn Map
Đơn vị tiền tệ
  • Số lượng:
  • Thành tiền
Measuring range: 0,01-0,5 ...35-700 L/min liquid
Connection: G ½..G 2 ¾ male
Material: PPS/st. steel PVDF/Hastelloy, Tantalum
Max. pressure: 10 bar
Accuracy:± 2 % FS
Analogue output, counter,
contacts, digital indicator

Flow meter Type MIK is used for measuring and monitoring smaller and medium-sized fl ow of conductiv-ity liquids in pipes.

The device operates according to the electromagnetic meas-urement principle. According to Faraday’s Law of magnetic induction a voltage is induced in a conductor moving through a magnetic fi eld. The electrically conductive measuring agent acts as the moved conductor. The voltage induced in the measuring agent is proportional to the fl ow velocity and is therefore a value for the volumetric fl ow. The fl owing media must have a minimum conductivity. The induced voltage is picked up by two sensing electrodes which are in contact with the measuring agent and sent to the measuring amplifi er. The fl ow rate will be calculated based on the cross sectional area of the pipe.

The measurement is not depending on the process liquid and its material properties such as density, viscosity and tempera-ture. The device may be equipped with a switch, frequency or analogue output. Moreover, there is a compact electronic system to be selected from, which contains a switch and an analogue output.

The device series is completed by an optionally obtainable dosing and counter electronic system. The counter electron-ics system shows the current fl ow rate on the fi rst line of the display and shows the partial or overall volume on the second line. A dosing electronic system controls simple fi lling duties and also measures the fl ow rate, overall volume and fi lling volume. The analogue output and two relay outputs can be utilised for the further processing of signals.